The Single Component Batching Controller PR 1614 is
specially designed for that range of batching applications, which
require only one component to be batched in charge or discharge mode
such as filling and loading stations.
Furthermore the conjunction of a charge and a
discharge process can be selected. Single batches, a predefined number
of cycles or even continuous processing can be chosen.
In conjunction with higher level process control
equipment even multicomponent batching processes with maximum 30
components, such as mixing and blending stations, can be performed. The
data and command interchange can be easily made via serial interface
according to EW, Modbus or DUST 3964R protocol.
The interlock to the process is made via control
inputs and outputs. The PR 1614 can be fully manually controlled via
display and keyboard.
The bright and rich in contrast vacuum flourescent
display assures good readability over wide viewing angles even under bad
conditions, and the IP 65 front panel withstands rough industrial
Due to a load cell connection in 6-wire technique,
distances of up to 300 m between the PR 1614/01 and the load cells are
permitted without any loss of accuracy. Maximum 6 load cells of 650 Ohm
or 4 of 350 Ohm input resistance can be connected.